The 5-HIAA test measures the amount of 5-hydroxyindoleacetic acid, a breakdown product of serotonin, in the urine collected over a 24-hour period.
Primarily used to diagnose and monitor carcinoid tumors, especially those that produce serotonin.
These tumors are most commonly found in the gastrointestinal tract or lungs.

Test: 5FU Panel
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 14th Working Day by 7 pm
Department: Molecular

Test: 5q Deletion (MDS) - FISH
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in Sodium Heparin tube
Instruction: Brief clinical history mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: 7q Deletion - FISH
MRP: 
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in Sodium Heparin tube
Instruction: Brief clinical history mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: ABSOLUTE EOSINOPHIL COUNT
MRP:
Parameters:
Method: Cell Counter & Microscopy
Sample Type: 3 ml. (2 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction: DO NOT FREEZE
TAT: Same Working Day by 7pm
Department: Haematology

Test: ABSOLUTE LYMPHOCYTE COUNT
MRP:
Parameters:
Method: Cell Counter & Microscopy
Sample Type: 3 ml. (2 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction: DO NOT FREEZE
TAT: Same Working Day by 7pm
Department: Haematology

Test: ABSOLUTE NEUTROPHIL COUNT
MRP:
Parameters:
Method: Cell Counter & Microscopy
Sample Type: 3 ml. (2 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction: DO NOT FREEZE
TAT: Same Working Day by 7pm
Department: Haematology

Test: ACE (Adeno CMV Epsteinbar Virus) Quantitative
MRP:
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction:
TAT: 7th working day by 7 pm
Department: Molecular

The ACE test measures the level of angiotensin converting enzyme in your blood. ACE is an enzyme made by the lungs and other tissues. It helps control blood pressure by converting angiotensin I to angiotensin II (which narrows blood vessels).

Test: Acetone / Ketone Bodies
MRP:
Parameters:
Method:
Sample Type:
Instruction:
TAT:
Department: Biochemistry

Test: Acetylcholine Receptor Autoantibodies (Achr-Ab)
MRP: 6980
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Mon & Fri 8 Am
Department: Immunology

The Acid Phosphatase, Total test measures the level of acid phosphatase enzyme in your blood. This enzyme is mainly found in the prostate gland, but also in the liver, spleen, and red blood cells.

It is mostly used to help detect or monitor prostate cancer or prostate gland disorders. In some cases, it can also help diagnose certain bone diseases or blood cell disorders.

Test: ACTIVATED PARTIAL THROMBOPLASTIN TIME (APTT)
MRP:
Parameters:
Method: Coagulometry
Sample Type: 4 ml. (3 ml. Minimum) PPP (Platelet Poor Plasma) from 2 Sodium Citrate tubes prepared within 1 hr of collection. Aliquot PPP in 2 transport vials and FREEZE.
Instruction: Preparation of PPP : 12 -14 Hrs. (Overnight) fasting is preferred. Centrifuge the blood sample at 3000rpm for 10 minutes within 1 hr. of collection to separate the plasma. Transfer the Plasma obtained to a clean plastic tube using plastic tipped pipette avoiding buffy coat & centrifuge it again at 3700 rpm & finally transfer the PPP into fresh, clean & labelled plastic tubes which contains <10,000 cells/cu. mm. DULY FILLED COAGULATION REQUISITION TO BE ATTACHED
TAT: Same Working Day by 7pm
Department: Haematology

Test: Acute Leukemia Screeing Panel - l
MRP:
Parameters: AML/ETO, Inv(16), PML/RARA, Bcr/Abl, TEL/AML1, MLL, E2AT
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5-6 ml whole blood /3-4 ml bone marrow in 2 EDTA Vacutainers.
Instruction: Send immediately in cold gel packs by courier. DO NOT FREEZE.
TAT: 10th Working Day by 7pm
Department: Molecular

The Adenosine Deaminase (ADA), Plasma test measures the level of ADA enzyme in the blood plasma. ADA is involved in the metabolism of purines and plays a role in the development and maintenance of the immune system, especially T-lymphocytes.
This test is commonly used as a supportive diagnostic tool for:
Tuberculosis (TB) – especially tuberculous pleuritis when ADA is elevated in pleural fluid.
Other infections or conditions with immune activation, such as sarcoidosis or certain malignancies.

ADA is an enzyme involved in the breakdown of adenosine, which plays a role in the immune system. This test is commonly used to help detect or rule out tuberculosis (TB), especially TB affecting the lungs or the fluid around the lungs (pleural TB).

ADA is an enzyme involved in the breakdown of adenosine, which plays a role in the immune system. This test is commonly used to help detect or rule out tuberculosis (TB), especially TB affecting the lungs or the fluid around the lungs (pleural TB).

Test: Adeno Virus IgG Antibody
MRP: 3755
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction:
TAT: 10th Working Day by 7pm
Department: Immunology

Test: Adeno Virus IgM Antibody
MRP: 3755
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction:
TAT: 10th Working Day by 7pm
Department: Immunology

Test: Adeno Virus Qualitaitve Detection
MRP:
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5-6 ml whole blood /3-4 ml bone marrow in 2 EDTA Vacutainers.
Instruction: Haemolysed samples are not acceptable.
TAT: 10th Working Day by 7pm
Department: Molecular

Test: Adeno Virus Quantitative Detection
MRP:
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5-6 ml whole blood /3-4 ml bone marrow in 2 EDTA Vacutainers.
Instruction: Haemolysed samples are not acceptable.
TAT: 10th Working Day by 7pm
Department: Molecular

Test: ADRB2 Genotyping
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: Adrenalin (Epinephrine)
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction: Plasma-EDTA ( Freeze The Specimen Immediately After Separation. Specimen Collected Between 6-10 am is Desirable)+ Clinical History
TAT: 7th working day by 7 pm
Department: Immunoassay

Test: Adrenocorticotropic Hormone (ACTH)
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Plasma from 1 EDTA (Lavender top) tube
Instruction: Draw blood between 8- 10 a.m. into 1 EDTA (Lavender Top) tube. Mix well, separate and transfer plasma IMMEDIATELY into a screw capped, plastic transport vial and FREEZE.
TAT: 3rd Working Day by 7 m
Department: Immunoassay

Test: AFB I Sputum
MRP:
Parameters:
Method: Microscopy/Ziehl Neelsen Stain
Sample Type: Sputum
Instruction:
TAT: 2nd Working Day by 7 pm
Department: Microbiology

Test: AFB I Urine
MRP:
Parameters:
Method: Microscopy/Ziehl Neelsen Stain
Sample Type: Urine
Instruction:
TAT: 2nd Working Day by 7 pm
Department: Microbiology

Test: AFB II Sputum
MRP:
Parameters:
Method: Microscopy/Ziehl Neelsen Stain
Sample Type: Sputum
Instruction:
TAT: 2nd Working Day by 7 pm
Department: Microbiology

Test: AFB II Urine
MRP:
Parameters:
Method: Microscopy/Ziehl Neelsen Stain
Sample Type: Urine
Instruction:
TAT: 2nd Working Day by 7 pm
Department: Microbiology

Test: AFB III Sputum
MRP:
Parameters:
Method: Microscopy/Ziehl Neelsen Stain
Sample Type: Sputum
Instruction:
TAT: 2nd Working Day by 7 pm
Department: Microbiology

Test: AFB III Urine
MRP:
Parameters:
Method: Microscopy/Ziehl Neelsen Stain
Sample Type: Urine
Instruction:
TAT: 2nd Working Day by 7 pm
Department: Microbiology

Test: AFB STAIN /Interpretation
MRP:
Parameters:
Method: Microscopy/Ziehl Neelsen Stain
Sample Type: SPUTUM/FLUID
Instruction:
TAT: Same Working Day by 7pm
Department: Microbiology

Test: AFB Stain Body Fluid
MRP:
Parameters:
Method: Microscopy/Ziehl Neelsen Stain
Sample Type: Body Fluide
Instruction:
TAT: 2nd Working Day by 7 pm
Department: Microbiology

Test: AFB Stain Sputum
MRP:
Parameters:
Method: Microscopy/Ziehl Neelsen Stain
Sample Type: Sputum
Instruction:
TAT: 2nd Working Day by 7 pm
Department: Microbiology

Test: AFB Stain Stool
MRP:
Parameters:
Method: Microscopy/Ziehl Neelsen Stain
Sample Type: Stool
Instruction:
TAT: 2nd Working Day by 7 pm
Department: Microbiology

Test: AFB Stain Tissue
MRP:
Parameters:
Method: Microscopy/Ziehl Neelsen Stain
Sample Type: Tissue
Instruction:
TAT: 2nd Working Day by 7 pm
Department: Microbiology

Test: AFB Stain Urine
MRP:
Parameters:
Method: Microscopy/Ziehl Neelsen Stain
Sample Type: Spot Urine
Instruction:
TAT: 2nd Working Day by 7 pm
Department: Microbiology

The Albumin test measures the level of albumin, a protein made by the liver, in your blood. Albumin helps keep fluid in your blood vessels and carries hormones, vitamins, and medicines throughout your body. It is a marker of liver function, kidney health, and nutritional status.

This test measures the ratio between two types of proteins in your blood: albumin and globulin.

Albumin helps keep fluid in your blood vessels and carries hormones, vitamins, and other substances.

Globulin supports your immune system and helps fight infections.

This test measures the amount of albumin (a type of protein) in your urine collected over 24 hours. Normally, urine has little or no albumin. If albumin is present in high amounts, it may be a sign of kidney damage or disease, especially in people with diabetes or high blood pressure.

This test measures the amount of albumin, a type of protein, in a body fluid sample (like pleural fluid, peritoneal/ascitic fluid, or others). Albumin helps doctors understand whether the fluid buildup is due to a medical condition like infection, inflammation, or liver disease.

It helps to:

• Differentiate between transudate and exudate fluid.
• Assess causes of fluid accumulation

The Albumin/Creatinine Ratio (ACR) test is a urine test used to check for early signs of kidney damage, especially in people with diabetes or high blood pressure.

• Albumin is a type of protein that should not be present in large amounts in urine.
• Creatinine is a waste product that your body normally removes through urine.

The ACR test compares the amount of albumin to creatinine in a urine sample. This helps doctors find even small amounts of protein leakage from the kidneys — an early sign that the kidneys might not be working properly.

The Aldolase test measures the level of aldolase enzyme in your blood. This enzyme helps break down sugars to produce energy and is mostly found in muscles. 

To check for muscle damage or disease, such as:

• Muscular dystrophy
• Inflammatory muscle conditions (like polymyositis or dermatomyositis)
• Sometimes used to monitor liver or heart issues (though other tests are more common now)

Test: Aldosterone - Serum
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Min.) Serum from 1 SST (Gel Tube). Treatment history required if patient on spironolactone / ACE inhibitors.
Instruction: Overnight fasting is preferred. Haemolysed sample is not acceptable
TAT: 3rd Working Day by 7 m
Department: Immunoassay

Test: Aldosterone - Urine
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 10 ml. (5 ml. Minimum) Well mixed aliquot of 24 Hour Urine in sterile, screw capped container.
Instruction: Keep sample refrigerated during collection. Add boric acid (1 gm / 100 ml. of urine) to the 24 hour collection to maintain pH below 7.5, mix well and take the aliquot. Record & Mention 24-hour volume on urine container and test requisition form.
TAT: 3rd Working Day by 7 m
Department: Immunoassay

Test: ALK Gene Rearrangement - FISH
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: FFPE tissue block
Instruction: Histopathology Report Mandatory
TAT: 10th Working Day by 7 pm
Department: Molecular

The ALP test measures the level of alkaline phosphatase, an enzyme found in many parts of the body, especially the liver, bones, kidneys, and bile ducts.

Why it is done:

• To check liver health
• To detect bone problems
• To find out the cause of jaundice, fatigue, or bone pain

Test: ALL by NGS
MRP:
Parameters:
Method: NGS (Next Generation Sequencing)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction: Clinical History Mandatory
TAT: 17th Working Day by 7 pm
Department: Molecular

Test: ALL Comprehensive Panel-1
MRP: Rs.22155.00
Parameters: Karyotyping BM - BCR/ABL Qual(t 1:19), E2A PBX1(t 12:21), TEL/AML(t 4:11), MLL/AF4
Method: Cell Culture/RT-PCR
Sample Type: 2-3ml Bone Marrow and 5-6ml Whole Blood in Sodium Heparin and EDTA
Instruction: Brief clinical history mandatory
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: ALL Cytogenetic Panel
MRP:
Parameters: FISH TEL/AML t(12;21), FISH BCR/ABL t(9;22), FISH MLL Gene Rearrangement t(1;19)
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: 4-5ml Bone Marrow/5-6ml Whole Blood in Sodium Heparin
Instruction:
TAT: 5th Working Day by 7pm
Department: Molecular

Test: ALL Multiplex panel
MRP:
Parameters: t(9;22), t(12;21), t(1;19), t(4;11)
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 2-3ml Bone Marrow/3-4ml Whole Blood in EDTA
Instruction: Brief clinical history mandatory
TAT: 10th working day by 7 pm
Department: Molecular

Test: ALLERGY FOOD ""IgE""
MRP: 4270
Parameters:
Method:            Immunoblot
Sample Type:  5ml. (3 ml. Minimum) Serum/plasma
Instruction:
TAT:                  Same Working Day by 7pm
Department:    Allergen

Test:                     ALLERGY FOOD & INHALATION ""IgE""- 40 Parameter
MRP: 8540                    
Parameters:
Method:                Immunoblot
Sample Type:      5ml. (3 ml. Minimum) Serum/plasma
Instruction:
TAT:                       Same Working Day by 7pm
Department:      Allergen

Test:                   ALLERGY INHALATION ""IgE""
MRP: 4270               
Parameters:
Method:             Immunoblot
Sample Type:    5ml. (3 ml. Minimum) Serum/plasma
Instruction:
TAT:                   Same Working Day by 7pm
Department:     Allergen

Alpha-1 Antitrypsin, a protein made by the liver, protects the lungs from damage caused by enzymes that fight infections.

Why it's done:

• To check for Alpha-1 Antitrypsin Deficiency, a genetic disorder that can cause lung diseases (like COPD, emphysema) and liver problems.

Test: Alpha Feto Protien, AFP
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 4ml (2ml minimum) Body fluid in a sterile screw capped plastic container.
Instruction:
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: Alpha Thalassemia Complete Workup Panel 
MRP: Rs.24175.00
Parameters:
Method: MLPA (Multiplex ligation-dependent probe amplification)
Sample Type: 10 ml Whole Blood in 2 EDTA (lavender top) tubes
Instruction: Clinical History Mandatory
TAT: 18th/20th Working Day by 7 pm
Department: Molecular

Test: Alpha Thalassemia - PCR
MRP:
Parameters:
Method: PCR (Polymerase Chain Reaction)
Sample Type: 5mlWhole Blood in 1 EDTA (lavender top) tube. Clinical History required
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: Amebiasis (Entamoeba Histolytica) IgG
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Antl Mullerian Hormone, AMH
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction: Properly packed and previously labelled slides and blocks with clinical details and proper requisition form
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: AML by NGS
MRP:
Parameters:
Method: NGS (Next Generation Sequencing)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction: Clinical History Mandatory
TAT: 17th Working Day by 7 pm
Department: Molecular

Test: AML Comprehensive Panel 1
MRP:
Parameters: Karyotyping, AML/ETO, PML/RARA, BCR/ABL, INV 16, FLT3, NPM1
Method: FISH (Fluorescence in Situ Hybridization)/RT-PCR
Sample Type: 5-6 ml whole blood /3-4 ml bone marrow in EDTA and Sodium Heparin Vacutainers.
Instruction: Clinical History Mandatory
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: AML Cytogenetics Panel 1
MRP:
Parameters: FISH AML1/ETO, FISH PML/RARA , MLL Gene Rearrangement & Inv 16
Method: Culture+ FISH+ PCR
Sample Type: 4ml whole blood /Bone Marrow in Sod. Heparin tubes.
Instruction: Clinical History Mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: AML Cytogentics Panel 2
MRP:
Parameters: FISH MLL, FISH t(8;21), FISH t(15;17), FISH Inv(16)
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: 4ml whole blood /Bone Marrow in Sod. Heparin tubes.
Instruction: Clinical History Mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: AML Gene Panel - Basic
MRP:
Parameters: FLT3, NPM1, CEBPA
Method: PCR & Sequencing
Sample Type: 5-6 ml whole blood /3-4 ml bone marrow in 2 EDTA Vacutainers.
Instruction: Clinical History Mandatory
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: AML Multiplex - Advance
MRP:
Parameters: BCR/ABL, PML/RARA, AML/ETO, Inv 16, NPM1, FLT3, CEBPA
Method: Real Time PCR & Sequencing
Sample Type: 5-6 ml whole blood /3-4 ml bone marrow in 2 EDTA Vacutainers.
Instruction: Clinical History Mandatory
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: AML Multiplex - Basic
MRP:
Parameters: BCR/ABL P210, BCR/ABL P190, PML/RARA, AML/ETO, Inv 16, NPM1, FLT3
Method: Real Time PCR & Sequencing
Sample Type: 5-6 ml whole blood /3-4 ml bone marrow in 2 EDTA Vacutainers.
Instruction: Clinical History Mandatory
TAT: 14th Working Day by 7 pm
Department: Molecular

Test: AML Neo Panel
MRP:
Parameters: AML/ETO by FISH, Inv 16 by FISH, NPM1, FLT3, CEBPA
Method: FISH (Fluorescence in Situ Hybridization)/RT-PCR
Sample Type: 5-6 ml whole blood /3-4 ml bone marrow in EDTA and Sodium Heparin Vacutainers.
Instruction: Clinical History Mandatory
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: AML Prognostic Panel
MRP:
Parameters: AML/ETO, Inv 16, PML/RARA, FLT3
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5-6 ml whole blood /3-4 ml bone marrow in 2 EDTA Vacutainers.
Instruction: Clinical History Mandatory
TAT: 17th Working Day by 7 pm
Department: Molecular

Test: AML1/ETO Fusion Gene or t(8;21) - FISH
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in Sodium Heparin tube
Instruction: Brief clinical history mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: AML1/ETO t(8:21) Qualitative
MRP: Rs.8175.00
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5-6 ml whole blood /3-4 ml bone marrow in 2 EDTA Vacutainers.
Instruction: Clinical History Mandatory
TAT: 7th/ 10 Working Day by 7 pm
Department: Molecular

Test: Ammonia
MRP:
Parameters:
Method: Enzymatic
Sample Type: 2-3 ml EDTA Plasma
Instruction:
TAT: 3rd Working Day by 7 m
Department: Biochemistry

Test: Amoebiasis Antibodies IgG
MRP: 4025
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Amylase - Body Fluid
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: 2 ml.(1 ml. Minimum) body fluid in sterile plastic screw capped container
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: AMYLASE Urine
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: Urine
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Amylase, Serum
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Androstenedione
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction: Brief clinical history mandatory
TAT: 3rd Working Day by 7 m
Department: Immunoassay

Test: Aneuploidy Screening For Chromosomes 13,18,21,X & Y - Amniotic Fluid
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: Amniotic fluid: Collect 20-25ml of amniotic fluid in sterile conical centrifuge tubes
Instruction: Brief clinical history mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: Aneuploidy Screening For Chromosomes 13,18,21,X & Y - Placental Villi / Abortus Material
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: Solid Tissue (Skin biopsies, Products of Conception, Stillbirths): Collect 30-50mg of tissue in sterile media or two T-25 flasks that are 80- 100% confluent
Instruction: Brief clinical history mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: Aneuploidy Screening For Chromosomes 13,18,21,X & Y - Semen
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: Submit Semen in a sterile, screw capped container. For sample collection, period of 2-7 days (ideally 3 days) abstinence (no ejaculation) is mandatory
Instruction: Brief clinical history mandatory
TAT: 7th Working Day by 7 pm
Department: Molecular

Test: Anion Gap
MRP:
Parameters:
Method: Calculated
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Biochemistry

Test: Antenatal Diagnosis Of Beta Thalassemia
MRP:
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 14th Working Day by 7 pm
Department: Molecular

Test: Anti - HAV, IgG (Elisa)
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: Serum
Instruction:
TAT: 5th Working Day by 7pm
Department: Immunology

Test: Anti Cardiolipin IgG Antibodies
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti Cardiolipin IgM Antibodies
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti Centromear Ab
MRP: 5035
Parameters:
Method: ELiA (Enzyme Labeled Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti Cyclic CitrullinaPeptide, Anti-CCP
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: ANTI D TITRE
MRP:
Parameters:
Method:
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Haematology

Test: Anti Dnase B
MRP:
Parameters:
Method: Nephelometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti ds DNA - IFA
MRP:
Parameters:
Method: IFA (Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 5th Working Day by 7pm
Department: Immunology

Test: Anti ds-DNA
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 5th Working Day by 7pm
Department: Immunology

Test: Anti Factor Xa Antibody
MRP:
Parameters:
Method:
Sample Type: 4 ml. (3 ml. Minimum) PPP (Platelet Poor Plasma) from 2 Sodium Citrate tubes prepared within 1 hr of collection. Aliquot PPP in 2 transport vials and FREEZE.
Instruction: Preparation of PPP : 12 -14 Hrs. (Overnight) fasting is preferred. Centrifuge the blood sample at 3000rpm for 10 minutes within 1 hr. of collection to separate the plasma. Transfer the Plasma obtained to a clean plastic tube using a plastic tipped pipette avoiding buffy coat & centrifuge it again at 3700 rpm & finally transfer the PPP into fresh, clean & labelled plastic tubes which contains <10,000 cells/cu. mm.
TAT: 12th Working Day by 7 pm
Department: Immunology

Test: Anti GAD65 Test
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti GBM Ab
MRP:
Parameters:
Method: Immunoblot
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunology

Test: Anti Insulin Antibodies
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti Islet Cell Antibody
MRP:
Parameters:
Method: IFA (Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 4th Working Day by 7 pm
Department: Immunology

Test: Anti Jo-1 Antibody
MRP:
Parameters:
Method: Immunoblot
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti MAG Ab - Myelin Associated Glycoprotein
MRP:
Parameters:
Method: IFA (Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 7th working day by 7 pm
Department: Immunology

Test: Anti Mitochondrial Antibodies (AMA) - ELISA
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti Mitochondrial Antibodies (AMA) - IFA
MRP:
Parameters:
Method: IFA (Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti Musk Ab - Muscle Specific Kinase Antibody
MRP:
Parameters:
Method: RIA (Radio Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 7th working day by 7 pm
Department: Immunology

Test: Anti Nuclear Anti Body, ANA Qualitative
MRP:
Parameters:
Method: Latex Agglutination
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunology

Test: Anti Nuclear Antibody (ANA) - IFA
MRP:
Parameters:
Method: IFA (Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti Nuclear Antibody (ANA) Profile
MRP: 2930.00
Parameters:
Method: Immunoblot
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunology

Test: Anti Nuclear Antibody (ANA) Quantitave
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunology

Test: Anti Parietal Cell Antibody
MRP:
Parameters:
Method: IFA (Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 4th Working Day by 7 pm
Department: Immunology

Test: Anti Phospholipid IgG
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti Phospholipid IgM
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti Pm-Scl Antibody
MRP:
Parameters:
Method: Immunoblot
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti Smith Antibody (SM Antibody)
MRP:
Parameters:
Method: Immunoblot
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti Smooth Muscle antibodies (asma) with titre by ifa
MRP:
Parameters:
Method: IFA (Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 5th Working Day by 7 m
Department: Immunology

Test: Anti Sperm Antibodies
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 5th Working Day by 7 m
Department: Immunology

Test: Anti SS-A/Ro (60 KDA) Antibody
MRP:
Parameters:
Method: ELiA (Enzyme Labeled Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 5th Working Day by 7 m
Department: Immunology

Test: Anti SS-A/Ro (60 KDA, 52 KDA) Antibody
MRP:
Parameters:
Method: ELiA (Enzyme Labeled Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 5th Working Day by 7 m
Department: Immunology

Test: Anti SS-B/La Antibody
MRP:
Parameters:
Method: ELiA (Enzyme Labeled Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 5th Working Day by 7 m
Department: Immunology

The ASO Titre test measures the level of antibodies produced by your body against a toxin called Streptolysin O, which is made by Streptococcus bacteria (the bacteria that cause throat infections and skin infections).

Test: Anti Thrombin lll
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 4 ml. (3 ml. Minimum) PPP (Platelet Poor Plasma) from 2 Sodium Citrate tubes prepared within 1 hr of collection. Aliquot PPP in 2 transport vials and FREEZE.
Instruction: Preparation of PPP : 12 -14 Hrs. (Overnight) fasting is preferred. Centrifuge the blood sample at 3000rpm for 10 minutes within 1 hr. of collection to separate the plasma. Transfer the Plasma obtained to a clean plastic tube using plastic tipped pipette avoiding buffy coat & centrifuge it again at 3700 rpm & finally transfer the PPP into fresh, clean & labelled plastic tubes which contains <10,000 cells/cu. mm. DULY FILLED COAGULATION REQUISITION TO BE ATTACHED
TAT: 5th Working Day by 7 m
Department: Immunology

Test: Anti Thyroglobulin (Anti Tg)
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti TPO - Anti Thyroid Peroxidase Antibody
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: Anti Treponomal Antibody
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Anti u1 (RNP) Antibody
MRP:
Parameters:
Method: Immunoblot
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 7th working day by 7 pm
Department: Immunology

Test: Anti Voltage Gated Potassium Channel (Anti VGKC) .
MRP:
Parameters:
Method: IFA (Immunofluorescence Assay)
Sample Type: SERUM/CSF
Instruction:
TAT: 7th working day by 7 pm
Department: Immunology

Test: Anti Saccharomyces Cerevisiae IgA
MRP:
Parameters:
Method: ELiA (Enzyme Labeled Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 7th working day by 7 pm
Department: Immunology

Test: AntiSaccharomyces Cerevisiae IgG
MRP:
Parameters:
Method: ELiA (Enzyme Labeled Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 7th working day by 7 pm
Department: Immunology

Test: APC Gene Mutation (Somatic)
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: PARAFFIN BLOCK + SLIDE
Instruction: Histopathology Report Mandatory
TAT: 14th Working Day by 7 pm
Department: Molecular

Test: APC Gene Mutation Screening (Germline)
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction: clinical history
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: APLA Panel/ Phospholipid Syndrome Panel 5
MRP: 8725.00
Parameters: Anti Cardiolipin Antibody IgG/IgM, Beta 2 Glycoprotein IgG/IgM, Lupus Anticoagulant
Method: ELISA (Enzyme Linked Immunosorbent Assay) &Clot Based
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube) & 1ml Citrated Plasma.
Instruction:
TAT: 5th - 7th Working Day by 7 pm
Department: Immunology

Test: APLA Panel/ Phospholipid Syndrome Panel 7
MRP: 10440.00
Parameters: Anti Phospholipid Antibody IgG/IgM, Anti Cardiolipin Antibody IgG/IgM, Beta 2 Glycoprotein IgG/IgM, Lupus Anticoagulant
Method: ELISA (Enzyme Linked Immunosorbent Assay) &Clot Based
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube) & 1 ml Citrated Plasma.
Instruction:
TAT: 24/48 Hours
Department: Immunology

Test: Aplastic Anemia Gene Panel - NGS
MRP:
Parameters:
Method: NGS (Next Generation Sequencing)
Sample Type: 10 ml Whole Blood in 2 EDTA (lavender top) tubes
Instruction:
TAT: 35th Working Day by 7 pm
Department: Molecular

Test: Apolipoprotein A1
MRP:
Parameters:
Method: Nephelometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Biochemistry

Test: Apolipoprotein B
MRP:
Parameters:
Method: Nephelometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction: don't send citrate whole blood. separate citrate plasma by centrifugation at 2000 g for 15 min.
TAT: 3rd Working Day by 7 m
Department: Biochemistry

Test: Aquaporin 4 Antibodies (NMO-IgG ) - Serum
MRP:
Parameters:
Method: IFA (Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 4th Working Day by 7 pm
Department: Immunology

Test: Aquaporin 4 Antibodies (NMO-IgG) - CSF
MRP:
Parameters:
Method: IFA (Immunofluorescence Assay)
Sample Type: 3 ml CSF in a sterile screw caped container
Instruction:
TAT: 4th Working Day by 7 pm
Department: Immunology

This test checks for the presence of ASO antibodies in the blood. These antibodies are produced by the body in response to a Streptococcus bacterial infection (like strep throat or skin infection).

• Purpose: To find out if you've had a recent strep infection.
• Why it matters: A past strep infection can lead to complications like rheumatic fever or kidney problems if not treated properly.
• Qualitative result: The test only shows whether ASO antibodies are present or not (positive or negative), not the exact amount.

The ASO Quantitative test measures the amount of Anti Streptolysin O (ASO) antibodies in the blood. These antibodies are produced by the body in response to a Streptococcus bacterial infection, such as strep throat or skin infections.

Test: ASO Slide Agglutination
MRP:
Parameters:
Method: Agglutination
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Biochemistry

Test: Aspergillus IgM
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Aspergillus IgG
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Aspergillus (galactomannan) Antigen
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: SERUM/BAL FLUID
Instruction:
TAT: 7th Working Day by 7 pm
Department: Immunology

Test: Autoimmuno Enchphelitis Panel - CSF
MRP:
Parameters:
Method: IFA (Immunofluorescence Assay)
Sample Type: CSF
Instruction:
TAT: 7th working day by 7 pm
Department: Immunology

Test: Autoimmuno Enchphelitis Panel - Serum
MRP:
Parameters:
Method: IFA (Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 7th working day by 7 pm
Department: Immunology

Test: Bal Routine Examination
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: 3 ml BAL in sterile screw caped container
Instruction:
TAT: 3rd Working Day by 7 m
Department: Cytology

Test: Basic Clorectal Cancer Panel A
MRP: 30205.00
Parameters: KRAS, NRAS, BRAF, MSI
Method: RT-PCR & IHC
Sample Type: FFPE tissue block
Instruction: Histopathology Report Mandatory
TAT: 12th/15th Working Day by 7 pm
Department: Molecular

Test: Basic Colorectal Cancer Panel B
MRP:
Parameters: KRAS, NRAS, BRAF
Method: PCR & Sequencing
Sample Type: FFPE tissue block
Instruction: Histopathology Report Mandatory
TAT: 17th Working Day by 7 pm
Department: Molecular

Test: BCL1(11q13) & IGH(14q32) Gene or t(11;14) - FISH
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in Sodium Heparin tube
Instruction: Brief clinical history mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: BCL2 Gene Rearrangement - Bone Marrow
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: 5 ml. (3 ml. Minimum) Bone Marrow in Sodium Heparin tube
Instruction: Brief clinical history mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: BCL2 Gene Rearrangement - FFPE Block
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: FFPE tissue block
Instruction: Histopathology Report Mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: BCR/ABL Fusion Gene or t(9:22) or Philadelphia Chromosome
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in Sodium Heparin tube
Instruction: Brief clinical history mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: BCR/ABL IS - International Scale (Philadelphia Chromosome)
MRP:
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction: Clinical History Mandatory
TAT: 10th Working Day by 7pm
Department: Molecular

Test: BENCE JONES PROTEIN
MRP:
Parameters:
Method: HEAT
Sample Type: Urine
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Beta Thalassemia
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: Beta 2 Glycoprotein IgG
MRP:
Parameters:
Method: ELiA (Enzyme Labeled Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Beta 2 Glycoprotein IgM
MRP:
Parameters:
Method: ELiA (Enzyme Labeled Immunofluorescence Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Beta 2 Microglobulin - Serum
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunoassay

Test: Beta 2 Microglobulin - Urine
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunoassay

Test: Beta HCG Free (FBHCG)
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction: Brief clinical history mandatory
TAT: 3rd Working Day by 7 m
Department: Immunoassay

Test: Beta- Human Chronic Gonadotropin, BHCG, Serum
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: Beta- Human Chronic Gonadotropin,BHCG Urine
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT:
Department: Immunoassay

Test: Beta Thalassemia - MPLA
MRP:
Parameters:
Method: MLPA (Multiplex ligation-dependent probe amplification)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction: Clinical History Mandatory
TAT: 18th Working Day by 7 pm
Department: Molecular

Test: Beta Thalassemia - PCR
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction: Clinical History Mandatory
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: Beta Thalassemia & XMN1 Polymorphism
MRP:
Parameters:
Method: PCR RFLP (Restriction Fragment Length Polymorphism) + Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction: Clinical History Mandatory
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: Beta Trace Protein (BTP)
MRP:
Parameters:
Method: Nephelometry
Sample Type: 2 ml Serum and Ear/Nasal Secreted Fluid
Instruction:
TAT: 3rd Working Day by 7 m
Department: Immunology

Test: Beta-Glucan
MRP:
Parameters:
Method: Colorimetry
Sample Type: 2 ml Serum in gel tube
Instruction:
TAT: Weekly
Department: Biochemistry

Test: Bethesda Assay
MRP:
Parameters:
Method: Clot Based
Sample Type: 4 ml. (3 ml. Minimum) PPP (Platelet Poor Plasma) from 2 Sodium Citrate tubes prepared within 1 hr of collection. Aliquot PPP in 2 transport vials and FREEZE.
Instruction: Preparation of PPP : 12 -14 Hrs. (Overnight) fasting is preferred. Centrifuge the blood sample at 3000rpm for 10 minutes within 1 hr. of collection to separate the plasma. Transfer the Plasma obtained to a clean plastic tube using plastic tipped pipette avoiding buffy coat & centrifuge it again at 3700 rpm & finally transfer the PPP into fresh, clean & labelled plastic tubes which contains <10,000 cells/cu. mm. DULY FILLED COAGULATION REQUISITION TO BE ATTACHED
TAT: 3rd Working Day by 7 m
Department: Haematology

Test: Bilirubin Direct
MRP: 270
Parameters:
Method: Spectrophotometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Bilirubin Total
MRP: 270
Parameters:
Method: Spectrophotometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Bilirubin Total & Direct
MRP:540
Parameters:
Method: Spectrophotometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Biofire Panels
MRP:
Parameters:
Method: Biofire PCR
Sample Type: 3 ml CSF in a sterile screw caped container
Instruction:
TAT:
Department: Molecular

Test: Biopsy Renal Transplant With C4D (Without IF)
MRP:
Parameters:
Method: Microscopy / Manual
Sample Type: Submit specimen in 10% Formal- Saline. The Formal-saline should cover the specimen completely. The container must be leak-proof.
Instruction: Send at 18-22° C. Brief Clinical History in Histopathology.
TAT: 7th Working Day by 7 pm
Department: Histopathology

Test: Biopsy Skin
MRP:
Parameters:
Method: Microscopy / Manual
Sample Type: Submit specimen in 10% Formal- Saline. The Formal-saline should cover the specimen completely. The container must be leak-proof.
Instruction: Send at 18-22° C. Brief Clinical History in Histopathology.
TAT: 5th Working Day by 7pm
Department: Histopathology

Test: BIOPSY, LARGE SPECIMEN
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: Paraffin block OR Tissue in 10% formalin (duration/fixation should be mentioned) 1 Block/ 1 cm.
Instruction:
TAT: 5th Working Day by 7pm
Department: Histopathology

Test: BIOPSY, LARGE, COMPLEX / CANCER SPECIMEN
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: Paraffin block OR Tissue in 10% formalin (duration/fixation should be mentioned) 1 Block/ 1 cm.
Instruction:
TAT: 7th Working day
Department: Histopathology

Test: BIOPSY, MEDIUM SPECIMEN
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: Paraffin block OR Tissue in 10% formalin (duration/fixation should be mentioned) 1 Block/ 1 cm.
Instruction:
TAT: 6th Working Day
Department: Histopathology

Test: BIOPSY, SMALL SPECIMEN
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: Paraffin block OR Tissue in 10% formalin (duration/fixation should be mentioned) 1 Block/ 1 cm.
Instruction:
TAT: 5th Working Day by 7pm
Department: Histopathology

Test: BK & JC Virus Qualitative Detection
MRP: 10070.00
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube or 5 ml urine in sterile screw caped container
Instruction:
TAT: 5th/7th Working Day by 7pm
Department: Molecular

Test: BK Virus Quantitative Detection
MRP: 11075.00
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 4th/7th Working Day by 7 pm
Department: Molecular

Test: Blast Cell CSF
MRP:
Parameters:
Method:
Sample Type: CSF
Instruction:
TAT: Same Working Day by 7pm
Department: Histopathology

Test: Bleeding Disorder Screening
MRP:
Parameters: CBC, PT, APTT, RIPA (Ristocetin Induced Platelet Aggregation), Clot Retraction, Factor XIII Screen
Method: Refer to Individual Assays
Sample Type: 3 ml Whole Blood in EDTA tube and 3 ml Whole blood in Sodium Citrate tube
Instruction:
TAT: 7th Working Day by 7 pm
Department: Haematology

Test: BLEEDING TIME (BT)
MRP:
Parameters:
Method: Modified IVY
Sample Type: 3 ml Whole Blood in EDTA
Instruction: Outside sample not acceptable
TAT: Same Working Day by 7pm
Department: Haematology

Test: Block and Slide Preparation per block
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: Fermalined grossed tissue
Instruction:
TAT: 3rd Working Day
Department: Haematology

Test: BLOOD GROUP ABO & Rh TYPE
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: Whole Blood
Instruction:
TAT: Same Working Day by 7pm
Department: Haematology

Test: Blood Urea Nitrogen (BUN)
MRP:
Parameters:
Method: Calculated
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Haematology

Test: Bone Marrow Aspiration / Examination
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: Submit specimen in 10% Formal- Saline. The Formal-saline should cover the specimen completely. The container must be leak-proof. Send at 18 - 22 C.
Instruction: Brife clinical history mandatory
TAT: 4th Working Day by 7pm
Department: Cytology

Test: Bone Marrow Biopsy Examination
MRP:
Parameters:
Method: Decalcification, Processing, Staining & Microscopy
Sample Type: Submit specimen in 10% Formal- Saline. The Formal-saline should cover the specimen completely. The container must be leak-proof. Send at 18 - 22 C.
Instruction: Brife clinical history mandatory
TAT: 3rd Working Day by 7 pm
Department: Cytology

Test: Bone Marrow, Iron Stain
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: Bone Marrow
Instruction:
TAT: 3rd Working Day
Department: Cytology

Test: BRAF V600E Mutation
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: FFPE tissue block
Instruction: Histopathology Report Mandatory
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: BRCA 1 & 2 Complete Sequencing
MRP:
Parameters:
Method: NGS (Next Generation Sequencing)
Sample Type: 10 ml Whole Blood in 1 EDTA (lavender top) tube
Instruction: Brief clinical history mandatory
TAT: 20th Working Day by 7 pm
Department: Molecular

Test: Brucella IgG
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: Brucella IgM
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: Brucellosis (Serum Agglutination Test)
MRP:
Parameters:
Method: Agglutination
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: Brucella Antigen (Brucelosis)
MRP:
Parameters:
Method: Agglutination
Sample Type: Serum
Instruction:
TAT: Same Working Day by 7pm
Department: Immunology

Test: BUN/ Creatinine Ratio
MRP:
Parameters:
Method: Calculated
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Biochemistry

Test: C MYC Gene Rearrangement - FFPE Block
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: FFPE tissue block
Instruction: Histopathology Report Mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: C1 Esterase Inhibitor
MRP:
Parameters:
Method: Nephelometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Biochemistry

Test: C3 and C4 Complement Panel
MRP:
Parameters:
Method: Nephelometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: C3 COMPLEMENT COMPONENT
MRP:
Parameters:
Method: Nephelometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: C4 Complement Component
MRP:
Parameters:
Method: Nephelometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: CA 125; Ovarian Cancer Marker
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: CA 15-3 ; Breast Cancer Marker
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: CA 19-9; Pancreatic Cancer Marker
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: CA 72.4
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 4th Working Day by 7 pm
Department: Immunoassay

Test: CAG Repeat For Huntington Disease
MRP: 17600.00
Parameters:
Method: PCR/Fragment Analysis
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction: Brief clinical history mandatory
TAT: 12th/ 15th Working Day by 7 pm
Department: Molecular

Test: Calcitonin
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: Calcium
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Calcium - Creatinine Ratio
MRP:
Parameters:
Method: Calculation
Sample Type: 10 ml Spot Urine Sample In Leak Proof container
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Calcium (Random) - Urine
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: 10 ml Spot Urine Sample In Leak Proof container
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Calcium 24- Hours Urine
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: 15 ml.(10.0 ml. minimum) Well mixed aliquot of 24 Hour Urine in a sterile, leak - proof, screw capped plastic transport container.
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Calcium Ionized
MRP:
Parameters:
Method: ISE (Ion Selective Electrode)
Sample Type: Primary Sample- 2 ml.(1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube) Secondary Sample-2 ml.(1 ml. Minimum) Whole Blood from 1 Sodium Heparin (Green top) tube.
Instruction: Overnight fasting is preferred.
TAT: 3rd working Day by 7pm
Department: Biochemistry

Test: Calprotectin, Stool
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 100 gms of stool in sterile container
Instruction:
TAT: 4th Working Day by 7 pm
Department: Immunoassay

Test: CALR Mutation
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: CALR Mutation Detection
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction: Brife clinical history mandatory
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: cAnca Anti Neutrophilic Cytoplasmic Antibody
MRP:
Parameters:
Method: Immunoblot
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunology

Test: cANCA pANCA Anti GBM Ab
MRP:
Parameters:
Method: Immunoblot
Sample Type: 5 ml. (2 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunology

Test: Carbamazepine
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml.(1 ml. Minimum) serum from 1 Red Top (No Additive) tube.
Instruction: 3 ml of serum/Plasma (sample collect in, plain vacutainer, not in gel tube) Clinical history, height, weight , age, collection date and time is mandatory
TAT: 3rd Working Day by 7 m
Department: Immunoassay

Test: Carbamazepine & Its Epoxide Levels - Blood
MRP:
Parameters:
Method: HPLC (High Performance Liquid Chromatography)
Sample Type: 3 ml. (2 ml. Minimum) serum/Plasma (in vacutainer, not in gel tube)
Instruction: 3 ml of serum/Plasma (sample collect in, plain vacutainer, not in gel tube) Clinical history, height, weight , age, collection date and time is mandatory
TAT: 4th Working Day by 7 pm
Department: Biochemistry

Test: Catecholamine's, 24 hrs. Urine
MRP:
Parameters:
Method: HPLC (High Performance Liquid Chromatography)
Sample Type: 50 ml.(10 ml. minimum) Well mixed aliquot of 24 Hour Urine in a sterile, screw capped, plastic container. Collect urine with appropriate volume of 50% HCl to maintain pH between 1-3
Instruction:
TAT: 7th Working Day by 7 pm
Department: Immunoassay

Test: Catecholamines, Plasma
MRP:
Parameters:
Method: HPLC (High Performance Liquid Chromatography)
Sample Type: 2 ml plasma in sterile container
Instruction:
TAT: 7th Working Day by 7 pm
Department: Immunoassay

Test: CBFB/MYH11 For Inv 16
MRP:
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction:
TAT: 7th Working Day by 7 pm
Department: Molecular

Test: CCR5 Delta32
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 7th working day by 7 pm
Department: Molecular

Test: CD19 Count
MRP:
Parameters:
Method: Flowcytometry
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 3rd Working Day by 7 m
Department: Haematology

Test: CD20 Count
MRP:
Parameters:
Method: Flowcytometry
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 3rd Working Day by 7 m
Department: Haematology

Test: CD3 CD4 Combined Count
MRP:
Parameters:
Method: Flowcytometry
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 3rd Working Day by 7 m
Department: Haematology

Test: CD3 Count
MRP:
Parameters:
Method: Flowcytometry
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 3rd Working Day by 7 m
Department: Haematology

Test: CD34 Count (Ishage Protocol)
MRP: 10070.00
Parameters:
Method: Flowcytometry
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 5th / 7th Working Day by 7 m
Department: Haematology

Test: CD4/CD8 Count
MRP: 3630
Parameters:
Method: Flowcytometry
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 5th /7 thWorking Day by 7 m
Department: Haematology

Test: CEA ; Carcino-embryonic Antigen
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: CEBPA Mutation
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: CEBPA Mutation Detection
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: Cell Block Preparation
MRP:
Parameters:
Method:
Sample Type: TISSUE
Instruction:
TAT: 2nd Working Day by 7 pm
Department: Histopathology

Test: Cell Counts - CSF
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: 2 ml CSF in sterile container
Instruction:
TAT: 3rd Working Day by 7 m
Department: Cytology

Test: CEP XY Chimerism
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in Sodium Heparin tube
Instruction:
TAT: 5th Working Day by 7pm
Department: Molecular

Test: Ceruloplasmin
MRP:
Parameters:
Method: Nephelometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 5th Working Day by 7pm
Department: Biochemistry

Test: CFTR (Cystic Fibrosis)
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: Chikungunya IgM - Rapid
MRP:
Parameters:
Method: Immunochromatography
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: Chikungunya PCR
MRP: 6150.00
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT:5th / 7th working days by 7 pm
Department: Molecular

Test: Chimerism Follow Up
MRP:
Parameters:
Method: PCR (Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction: Brife clinical history mandatory
TAT: 10th Working Day by 7pm
Department: Molecular

Test: Chimerism Follow Up
MRP:
Parameters:
Method: PCR (Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction:
TAT: 10th Working Day by 7pm
Department: Molecular

Test: Chlamydia IgG Antibodies
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 5th Working Day by 7pm
Department: Immunology

Test: Chlamydia IgM Antibodies
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 5th Working Day by 7pm
Department: Immunology

Test: Chlamydia PCR
MRP: 8885.00
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 20 ml Random urine in sterile container
Instruction:
TAT: 12th/15th Working Day by 7 pm
Department: Molecular

Test:

Test: Chloride (Cl)
MRP:
Parameters:
Method: ISE (Ion Selective Electrode)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Chloride Creatinine Ratio - Urine
MRP:
Parameters:
Method: Ion Selective Electrode/ Bio Chemical
Sample Type: 10 ml Spot Urine Sample In Leak Proof container
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Cholesterol Fluid
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: Fluid
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Cholesterol HDL Direct
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Cholesterol LDL (Low Density Lipoprotein Cholesterol) Direct
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction: separate serum within 1 hour of collection. ship refrigerated. do not freeze. minimum 10-12 hours fasting is mandatory. grossly hemolysed samples are not acceptable.
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Cholesterol Total
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: Serum
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Cholinesterase (Pseudo Cholinesterase) Serum
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (GelBarrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Chyle Examination, Urine
MRP:
Parameters:
Method: Manual
Sample Type: Urine
Instruction:
TAT: Same Working Day by 7pm
Department: Parasitology

Test: C-Kit & PDGRA (GIST)
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: FFPE tissue block
Instruction: Histopathology Report Mandatory
TAT: 14th Working Day by 7 pm
Department: Molecular

Test: C-Kit (D816V) Mutation Detection (AML)
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: FFPE tissue block
Instruction: Histopathology Report Mandatory
TAT: 14th Working Day by 7 pm
Department: Molecular

Test: C-kit Mutation
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: CK-MB
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: CK-NAC
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Clinical Exome Sequencing
MRP:
Parameters: 8,350 genes tested.
Method: NGS (Next Generation Sequencing)
Sample Type: 10 ml Whole Blood in EDTA tube
Instruction: Brife clinical history mandatory
TAT: 30th Working Day
Department: Molecular

Test: CLL Panel
MRP:
Parameters: FISH for Trisomy 12, Del 17p, Del 11q, Del 13q
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in Sodium Heparin tube
Instruction: Brife clinical history mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: CLOTTING TIME (CT)
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: 2 ml Whole Blood
Instruction:
TAT: Same Working Day by 7pm
Department: Haematology

Test: CMPD Reflex PaneL (Chronic Myeloproliferative Disorder)
MRP:
Parameters: Karyotyping, BCR/ABL1 Quali, JAK2 Exon 14, JAK2 Exon 12
Method: Karyotyping, PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in Sodium Heparin and EDTA tubes
Instruction:
TAT: 7th Working Day by 7 pm
Department: Molecular

Test: CMV - Urine
MRP:
Parameters:
Method: PCR (Polymerase Chain Reaction)
Sample Type: 20 ml Random urine in sterile container
Instruction:
TAT: 7th working day by 7 pm
Department: Molecular

Test: CMV PCR Qualitative
MRP: 4025.00
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in EDTA tubes or 10 ml ramdon urine
Instruction:
TAT: 4th/7th Working Day by 7 pm
Department: Molecular

Test: CMV PCR Quantitative
MRP: 11075.00
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in EDTA tubes or 10 ml ramdon urine
Instruction:
TAT: 7th/10th Working Day by 7 pm
Department: Molecular

Test: C-MYC Gene Rearrangement- Bone Marrow
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: 5 ml. (3 ml. Minimum) Bone Marrow in Sodium Heparin tube
Instruction: Brief clinical history mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: C-MYC Gene Rearrangement, Burkitt's Lymphoma
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: FFPE tissue block
Instruction: Brife clinical history mandatory
TAT: 5th Working Day by 7pm
Department: Molecular

Test: Colorectal Cancer - Basic Panel
MRP:
Parameters: KRAS, NRAS
Method: PCR & Sequencing
Sample Type: FFPE tissue block
Instruction: Histopathology Report Mandatory
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: COMPLETE BLOOD COUNT (CBC)
MRP:
Parameters:
Method: Cell counter
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: Same Working Day by 7pm
Department: Haematology

Test: Complete Chimerism by VNTR
MRP:
Parameters:
Method: Variable Number Tandem Repeat (VNTR)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 7th working day by 7 pm
Department: Haematology

Test: Congo Red (Amylod) Stain
MRP:
Parameters:
Method: Staining & Microscopy
Sample Type: FFPE tissue block
Instruction: Histopathology Report Mandatory
TAT: 4th Working Day by 7 pm
Department: Histopathology

Test: ENA Profile - Extractable Nuclear Antigen (Connective Tissue Disease Screen - (CTD Screen Test))
MRP: 5685.00
Parameters: RNP/Sm, Sm, RNP70, RNP A, RNP C, SSA - native (60kDa) SSA, Ro-52 recombianant (Ro - 52), SS - B, Scl -70, Pm - Scl100(Pm100), Jo-1 (Jo), Centromere B (CB), PCNA, dsDNA, Nucleosomes, Histones, Ribosomal Protein, AMA - M2
Method: Immunoblot
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: Coombs Test, Direct
MRP:
Parameters:
Method: Gel Card
Sample Type: Whole Blood
Instruction:
TAT: Same Working Day by 7pm
Department: Haematology

Test: Coombs Tests Indirect
MRP: 935
Parameters:
Method: Gel Card
Sample Type: Plasma
Instruction:
TAT: Same Working Day by 7pm
Department: Haematology

Test: Copper - 24 hr Urine
MRP:
Parameters:
Method: ICPMS (Inductively Coupled Plasma Mass Spectrometry)
Sample Type: 10 ml. (5 ml. Minimum) Well mixed aliquot of 24 Hour Urine taken in an acid-washed (metal free) sterile, leak - proof, screw capped transport vial.
Instruction: 24 hour urine sample add 20 gm boric acid as a preservative
TAT: 7th working day by 7 pm
Department: Biochemistry

Test: Copper Level
MRP:
Parameters:
Method: Bio Chemical
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction: 2 ml (1 ml min.) serum from 1 sst. diurnal variation present; take sample between 7 to 9 a.m. preferably 8 am. specify time and date on sample container and test request form. ship refrigerated or frozen. four hours fasting is recommended.clinical history required
TAT: 3rd working Day by 7pm
Department: Biochemistry

Test: Cortisol - 24 hr Urine
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 10 ml. (5 ml. Minimum) Well mixed aliquot of 24 Hour Urine in a sterile, leak - proof, screw capped, plastic transport container. Collect urine with 10 grams of boric acid to maintain sample integrity.
Instruction: Record 24 hr. Urine volume, mention on test request form
TAT: 3rd working Day by 7pm
Department: Immunoassay

Test: Cortisol - Evening
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction: 2 ml (1 ml min.) serum from 1 sst. diurnal variation present; take sample between 3 to 5 p.m. preferably 4 pm. specify time and date on sample container and test request form. ship refrigerated or frozen. four hours fasting is recommended.clinical history required
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: Cortisol - Morning
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction: 2 ml (1 ml min.) serum from 1 sst. diurnal variation present;specify time and date on sample container and test request form. ship refrigerated or frozen. four hours fasting is recommended.clinical history required
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: Cortisol, COR
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction: 2 ml (1 ml min.) serum from 1 sst. diurnal variation present; specify time and date on sample container and test request form. ship refrigerated or frozen. four hours fasting is recommended.clinical history required
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: C-Peptide - 2 hr After Glucose
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunoassay

Test: C-Peptide - Fasting
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunoassay

Test: C-Peptide - Post Prandial
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunoassay

Test: C-Peptide - Random
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunoassay

Test: C-Peptide, C-PEP
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: CRC Panel
MRP:
Parameters: KRAS, NRAS & BRAF
Method: PCR & Sequencing
Sample Type: FFPE tissue block
Instruction: Histopathology Report Mandatory
TAT: 17th Working Day by 7 pm
Department: Molecular

Test: Creatine Phosphokinase -Total ( CPK Total)
MRP:
Parameters:
Method: NAC Activated, (IFCC,DGKC)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Biochemistry

Test: Creatinine
MRP: 270
Parameters:
Method: Enzymatic Colorimetry
Sample Type: 3 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Creatinine - 24 hr Urine
MRP: 370
Parameters:
Method: Modified Jaffe Kinetic
Sample Type: 10 ml. (5 ml. minimum) Well mixed aliquot of 24 Hour Urine in a sterile, leak - proof, screw capped, plastic transport container.
Instruction: Record 24 hr. Urine volume, mention on test request form
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Creatinine - Urine
MRP:
Parameters:
Method: Modified Jaffe Kinetic
Sample Type: 10 ml Spot Urine Sample In Leak Proof container
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Creatinine Clearance Test (24 hr Urine CCT )
MRP:
Parameters:
Method: Modified Jaffe Kinetic
Sample Type: 10 ml. (5 ml. minimum) Well mixed aliquot of 24 Hour Urine in a sterile, leak - proof, screw capped, plastic container AND 2 ml. (1 ml. Minimum) serum from 1 SST (Gel Barrier Tube).
Instruction: Record 24 hr. Urine volume, mention on test request form
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Creatinine Clearance Test Includes serum and urine creatinine.
MRP:
Parameters:
Method:
Sample Type: 10 ml. (5 ml. minimum) Well mixed aliquot of 24 Hour Urine in a sterile, leak - proof, screw capped, plastic container AND 2 ml. (1 ml. Minimum) serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Creatinine Urine
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: 10 ml Spot Urine Sample In Leak Proof container
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: CRP C-Reactive Protein, Qualitative
MRP: 320
Parameters:
Method: Latex Agglutination
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: CRP C-Reactive Protein, Quantitative
MRP: 960
Parameters:
Method: Nephelometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Biochemistry

Test: Cryoglobulin
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 4th Working Day by 7 pm
Department: Immunology

Test: Cryptococcal Antigen - CSF
MRP:
Parameters:
Method: Immunochromatography
Sample Type: 2 ml CSF in sterile container
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: Cryptococcal Antigen - Serum
MRP:
Parameters:
Method: Immunochromatography
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: CS MOTT (Atypical /Mycobacteria Other Than Tuberculosis)
MRP:
Parameters:
Method: Microbroth Dilution Method
Sample Type: PURE CULTURE GOWTH/ MGIT TUBE
Instruction:
TAT: 18th Working Day by 7 pm
Department: Immunology

Test: CSF For TC,DC
MRP:
Parameters:
Method:
Sample Type: CSF
Instruction:
TAT: Same Working Day by 7pm
Department: Haematology

Test: CSF3R Mutation Detection
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction: collect swab sample from ot/icu/ward only
TAT: 10th Working Day by 7pm
Department: Molecular

Test: Culture & Sensitivity - Ear Swab
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: EAR PUS/ EAR SWAB/STERILE CONTAINER
Instruction:
TAT: 3rd Working Day by 7 pm
Department: Microbiology

Test: Culture & Sensitivity - Eye Swab
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: CONJUNCTIVAL SWAB/CORNEAL SCRAPINGS/STERILE CONTAINER
Instruction:
TAT: 3rd Working Day by 7 pm
Department: Microbiology

Test: Culture & Sensitivity - Wound
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: PUS IN SWAB /ASPIRATE IN STERILE CONTAINER
Instruction:
TAT: 3rd Working Day by 7 pm
Department: Microbiology

Test: Culture & Sensitivity Fluid (Synovial)
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: BODY FLUID- STERILE CONTAINER
Instruction:
TAT: 5th Working Day by 7pm
Department: Microbiology

Test: Culture & Sensitivity Swab (Bacterial)
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type:
Instruction:
TAT: 3rd Working Day by 7 pm
Department: Microbiology

Test: Culture / Sensitivity AFB, 24 Hours Urine
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: 24 hrs Urine in Sterile Container
Instruction:
TAT: 72Hrs
Department: Microbiology

Test: Culture / Sensitivity AFB, Body fluid
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: Body Fluid in Sterile Container
Instruction:
TAT: 72Hrs
Department: Microbiology

Test: Culture / Sensitivity AFB, Sputum
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: Sputum in Sterile Container
Instruction:
TAT: 72Hrs
Department: Microbiology

Test: Culture / Sensitivity AFB, Tissue
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: Tissue inin Sterile Container with Normal Saline
Instruction:
TAT: 72Hrs
Department: Microbiology

Test: Culture / Sensitivity Blood
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: Whole Blood
Instruction:
TAT: 72Hrs
Department: Microbiology

Test: Culture / Sensitivity CSF
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: CFS in Sterile Container
Instruction:
TAT: 72Hrs
Department: Microbiology

Test: Culture / Sensitivity FLUID
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: Fluid
Instruction:
TAT: 72Hrs
Department: Microbiology

Test: Culture / Sensitivity PUS
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: Pus
Instruction:
TAT: 72Hrs
Department: Microbiology

Test: Culture / Sensitivity Semen
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: Semen
Instruction:
TAT: 72Hrs
Department: Microbiology

Test: Culture / Sensitivity Sputum
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: Sputum
Instruction:
TAT: 72Hrs
Department: Microbiology

Test: Culture / Sensitivity Stool
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: Stool
Instruction:
TAT: 72Hrs
Department: Microbiology

Test: Culture / Sensitivity Throat Swab
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: Throat Swab
Instruction:
TAT: 72Hrs
Department: Microbiology

Test: Culture / Sensitivity Vagina Swab
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: Vagina Swab
Instruction:
TAT: 72Hrs
Department: Microbiology

Test: Culture / Sensitivity, Urine
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: M.S.U
Instruction:
TAT: Same Working Day by 7pm
Department: Microbiology

Test: Culture Blood/Bone Marrow Fungus
MRP:
Parameters:
Method: BACTEC BOTTLE
Sample Type: BLOOD/BONE MARROW INOCULATED IN MYCOF LYTIC BOTILE
Instruction:
TAT: 2 Weeks
Department: Microbiology

Test: Culture Bone
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: Bone in sterile container
Instruction:
TAT: 4th Working Day by 7 pm
Department: Microbiology

Test: Culture For Neisseria Gonorrhoeae
MRP:
Parameters:
Method: Conventional/Manual Culture Method
Sample Type: VAGINAL SECRETIONS/URETHRAL OR VAGNIAL SWAB IN RANSPORT MEDIUM
Instruction: (label with time of collection and administration of drug with transplant history)
TAT: 4th Working Day by 7 pm
Department: Microbiology

Test: Culture/Sensitivity Urine
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: Urine
Instruction:
TAT: Same Working Day by 7pm
Department: Microbiology

Test: Cyclin D1 - FISH
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: 3 ml Whole Blood in Sodium Heparin tube
Instruction:
TAT: 4th Working Day by 7 pm
Department: Molecular

Test: Cyclosporine
MRP:
Parameters:
Method: CLIA (Chemiluminescence Immuno Assay)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunoassay

Test: Cyclosporine
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: Serum
Instruction:
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: CYFRA 21-1
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: Serum
Instruction:
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: CYP2C*19 (Clopidogrel)
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: CYP3A5 Genotyping
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: CYP3A5 Genotyping
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: CYP3A5 Genotyping (Blood Pressure & Hyper Tension Marker)
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: Cystatin - C
MRP:
Parameters:
Method: Nephelometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunoassay

Test: Cysticercosis IgG
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: Cytology, Consultation - Second Opinion
MRP:
Parameters:
Method:
Sample Type: Smear
Instruction:
TAT: Same Working Day by 7pm
Department: Cytology

Test: Cytomegalovirus CMV Antibody Panel, IgG & IgM
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 4 ml. (2 ml. Minimum) Serum from 1 SST (GelBarrier Tube).
Instruction:
TAT: 3rd &6th Day
Department: Immunology

Test: Cytomegalovirus CMV IgG
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: Cytomegalovirus CMV IgM
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: Cytospin - CSF
MRP:
Parameters:
Method: Microscopy/ Manual
Sample Type: 2 ml CSF in sterile container
Instruction:
TAT: 3rd working Day by 7pm
Department: Cytology

Test: D3-Hydroxybutyrate
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Biochemistry

Test: D-Dimer
MRP:
Parameters:
Method: IFA (Immunofluorescence Assay)
Sample Type: 2 ml Citrated Plasma
Instruction:
TAT: Same Working Day by 7pm
Department: Haematology

Test: Del 5q (MDS)
MRP:
Parameters:
Method: FISH (Fluorescence in Situ Hybridization)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in Sodium Heparin tube
Instruction:
TAT: 5th Working Day by 7pm
Department: Molecular

Test: Delta-ALA & Porphobilinogen (Combined) - Urine
MRP:
Parameters:
Method: Column Chromatography & Spectrophotometry
Sample Type: 20 ml Spot Urine/24 hrs urine Sample In Leak Proof container
Instruction:
TAT: 4th Working Day by 7 pm
Department: Biochemistry

Test: Delta-Aminolevulinic Acid (δ-ALA) Level - Urine
MRP:
Parameters:
Method: Spectrophotometry
Sample Type: 20 ml Spot Urine Sample In Leak Proof container
Instruction:
TAT: 3rd working Day by 7pm
Department: Biochemistry

Test: Dengue - Typing
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: Dengue Antibodies IgG, IgM and NS1
MRP:
Parameters:
Method: Immunochromatography
Sample Type: Serum
Instruction:
TAT: 3rd & 6th Day
Department: Immunology

Test: Dengue PCR
MRP: 5890.00
Parameters:
Method: PCR (Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 5th / 7th working days
Department: Molecular

Test: Desmoglein l & lll Antibody
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: Detection Of Common Steroids in Unknown Drugs/Powder Preparations
MRP:
Parameters:
Method: TLC (Betamethasone, Dexamethasone, Deflazacort, Prednisolone, Methyl Prednisolone)
Sample Type: Alternative Medicine/Powders
Instruction:
TAT: 4th Working Day by 7 pm
Department: Immunoassay

Test: Detection Of Paraquat in Urine
MRP:
Parameters:
Method: Qualitative Test by Sodium Dithionite
Sample Type: 10 ml Spot Urine Sample In Leak Proof container
Instruction:
TAT: 4th Working Day by 7 pm
Department: Biochemistry

Test: Detection Of Phenols
MRP:
Parameters:
Method: Follin & Ciocalticeu's Reagent
Sample Type: 2 ml. (1 ml. Minimum) Gastric aspirate in a sterile, leak - proof screw capped, plastic container.
Instruction:
TAT: 4th Working Day by 7 pm
Department: Biochemistry

Test: Detection Of Thiocyanate in Urine
MRP:
Parameters:
Method: Qualitative Test by Ferric Chloride
Sample Type: 10 ml Spot Urine Sample In Leak Proof container
Instruction:
TAT: 4th Working Day by 7 pm
Department: Biochemistry

Test: DGP IgA - Deamidated Gliadin Peptide
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: DGP IgG -Deamidated Gliadin Peptide
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: DHEA - Dehydroepiandrosterone
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (GelBarrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunology

Test: DHEA-S Dehydroepiandrosterone Sulfate
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (GelBarrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: DHR (Dihydrorhodamine) Assay
MRP:
Parameters:
Method: Flowcytometry
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction: For Chronic Granulomatous Disease
TAT: 3rd working Day by 7pm
Department: Haematology

Test: DHT - Dihydrotestosterone
MRP:
Parameters:
Method: ELISA (Enzyme Linked Immunosorbent Assay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: 3rd working Day by 7pm
Department: Immunoassay

Test: DIFFERENTIAL LEUCOCYTE COUNT (DLC) FLUID
MRP:
Parameters:
Method: Cell counter
Sample Type: Whole Blood
Instruction:
TAT: Same Working Day by 7pm
Department: Haematology

Test: Digerorge Tuple (22q11) & 22q13 (Shank3) Gene
MRP:
Parameters:
Method: Culture + FISH
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in Sodium Heparin tube
Instruction: Brief clinical history mandatory
TAT: 10th Working Day by 7pm
Department: Molecular

Test: Digoxin
MRP:
Parameters:
Method: CMIA (Chemiluminescence Microparticle Immunoassay)
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction:
TAT: Same Working Day by 7pm
Department: Immunoassay

Test: DLC Profile Max
MRP:
Parameters: CBC, PT, APTI, Fibrinogen, FDP, D-Dimer
Method: Refer To Individual Tests
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube and 2 ml Plasma from Sodium Citrate tube
Instruction:
TAT: 3rd working Day by 7pm
Department: Biochemistry

Test: DLC Profile Mini
MRP:
Parameters: Fibrinogen, FDP, D-Dimer
Method: Refer To Individual Tests
Sample Type: 4 ml. (3 ml. Minimum) PPP (Platelet Poor Plasma) from 2 Sodium Citrate tubes prepared within 1 hr of collection. Aliquot PPP in 2 transport vials and FREEZE.
Instruction: Preparation of PPP : 12 -14 Hrs. (Overnight) fasting is preferred. Centrifuge the blood sample at 3000rpm for 10 minutes within 1 hr. of collection to separate the plasma. Transfer the Plasma obtained to a clean plastic tube using plastic tipped pipette avoiding buffy coat & centrifuge it again at 3700 rpm & finally transfer the PPP into fresh, clean & labelled plastic tubes which contains <10,000 cells/cu. mm. DULY FILLED COAGULATION REQUISITION TO BE ATTACHED
TAT: Same Working Day by 7pm
Department: Haematology

Test: DNMT3A Gene Mutation Detection
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: DNMT3a Mutation
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: Donor Specific Antibody - DSA
MRP:
Parameters:
Method: Luminex X-Map technology
Sample Type: Recipient - 3mL (2mL min.) serum from 1SST, Collect specimen preferably 48 hours after dialysis. Donor -12mL (10mL min.) whole blood in 2 Yellow Top (ACD) tubes. Ship refrigerated. Do Not Freeze.
Instruction: Brief history in Organ Transplant Clinical information form is mandatory
TAT: 12th Working Day by 7 pm
Department: Immunology

Test: DPD Gene Mutation
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: DPD Gene Mutation
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: Dual Marker Test - 1st Trimister
MRP:
Parameters: PAPP-A & Free B-HCG
Method: CLIA (Chemiluminescence Immuno Assay) & PRISCA 5.1
Sample Type: 2 ml. (1 ml. Minimum) Serum from 1 SST (Gel Barrier Tube).
Instruction: GA between 9 to 13 weeks+6 days only acceptable. Maternal Checklist Mandatory
TAT: 5th Working Day by 7pm
Department: Immunoassay

Test: Duchenne / Becker Muscular Dystrophy (79 Exons)
MRP:
Parameters:
Method: MLPA (Multiplex ligation-dependent probe amplification)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction: Clinical History Mandatory
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: E2/PBX1 t(1;19)
MRP:
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction:
TAT: 7th Working Day by 7 pm
Department: Molecular

Test: E2A/PBX1 or t(1;19)
MRP:
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction:
TAT: 7th Working Day by 7 pm
Department: Molecular

Test: E2A/PBX1 or t(1;19) Qualitative
MRP:
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction:
TAT: 7th Working Day by 7 pm
Department: Molecular

Test: EBV Qualitative
MRP:
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction:
TAT: 7th Working Day by 7 pm
Department: Molecular

Test: EBV Quantitative
MRP:
Parameters:
Method: RTPCR (Real Time Polymerase Chain Reaction)
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood/Bone Marrow in 1 EDTA (lavender top) tube
Instruction:
TAT: 7th Working Day by 7 pm
Department: Molecular

Test: EGFR Exon 19 Mutation
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: FFPE tissue block
Instruction: Histopathology Report Mandatory
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: EGFR Exon 21 Mutation
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: FFPE tissue block
Instruction: Histopathology Report Mandatory
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: EGFR Mutation
MRP:
Parameters:
Method: PCR & Sequencing
Sample Type: FFPE tissue block
Instruction: Histopathology Report Mandatory
TAT: 12th Working Day by 7 pm
Department: Molecular

Test: EMA Binding Test For Hereditary Spherocytosis
MRP:
Parameters:
Method: Flowcytometry
Sample Type: 5 ml. (3 ml. Minimum) Whole Blood in 1 EDTA (lavender top) tube
Instruction:
TAT: 3rd working Day by 7pm
Department: Haematology